Fluence Spydrx 340W VS Loriflux 320W Grow Light Reviews 2021

Hence, lightening up those notorious grow plants is a big nut to crack! Which, maybe bothering you up lately, and brought you to this web page.

LEDs are no doubt, a way better source of grow light from HIDs, HPSs, MHs, and so on. The best grow light for indoor plants comes with a fine blend of full-spectrum coverage, cost-effectiveness, and low heat emission.

Why Do You Need The Best LED Grow Lights?

Having a LED grow light set up is essential for various reasons. There are a lot of approaches to get light to your plants, yet how would you realize that it is the most proficient way? How might you realize that you aren’t really overheating your plants trying to direct more light into them and increment your yield?

The reality remains that LED lights are the most productive grow lights that are accessible. To start, LED grow lights moderate 75% more power than customary grow lights.

By utilizing less power, you will spend less cash on power bills and hence have significantly more cash remaining for getting a charge out of your rewards for all the hard work, as opposed to spending its dominant part running the grow task itself.

Vital too is that the best LED grow lights utilize particular wavelengths of light that are required the most by your plants. Conventional grow lights shoot your plants with light and subsequently a significant part of the light is squandered.

LED lights, then again, utilize just blue and red wavelengths to give your plants everything that they require without wasting power and light on things that aren’t successful. There are LEDs that component either both, or special case, which makes it conceivable to practice and tailor your lighting to your plant’s needs.

Fluence SPYDRx 340W LED

PROS:

• Solidly designed with a 100 percent working LEDS
• The veg cycle is great
• Runs cool and put off very little heat
• Easy to maintain temperature in a growing room

CONS:

• A bit expensive

Loriflux 6 blade 320W LED Grow Light

PROS:

• The panel costs less compared to other LEDs of the same watt.
• Covers almost a square area of 4ft x 3.6ft at 24″ Height which is perfect for a small tent
• Do not require much ventilation as it runs at a lower temperature
• Light spectrum perfectly mimics natural sun which is best for plant at all stages and also for cannabis growth

CONS:

• Some users complained of LED light burning easily after few days of purchase and no noticeable increase in their tomato

What makes the best LED grow light?

The best LED grow lights all have a few things in common — uniform spectrum, light intensity, efficiency, high-quality components, and safety and reliability.

Spectrum

The best LED grow lights have a uniform spectrum., So if you have 4 plants under your light, they all get the same spectrum.

We’ve already touched on the spectrum a bit, but it’s important to reiterate that the best spectrum consists of not just red and blue light, but also infrared (IR) and Ultraviolet (UV).

Full spectrum LEDs allow you to grow from seed to harvest with the same light, as opposed to having to replace bulbs or use different grow lights for veg and flower.

Is the spectrum constructed of single-wavelength ‘mono’ diodes, full-spectrum white diodes, COBs, or combinations of these? Do you prefer one over the other?

• Spectrums constructed of targeted single-wavelength diodes are becoming less common since they are not as energetically efficient, have lower PPFD, lack canopy penetration, and plants can appear purple underneath them. This is more common with budget lights.
• White light full-spectrums (white diodes or COBs) commonly range from 3000K to 4000K. 3000K is best for flower, 3500K is best for full-cycle, and 4000K is best for veg. Less common.
• Enhanced white light spectrums (base of white light enhanced with UV, blue, red, and/or far-red diodes) are a good option since they provide all of the useful wavelengths that plants absorb and utilize. 3500K with added 660nm red is a popular spectrum. Increasingly common and ideal.

Is the spectrum sufficient for your plant’s growth stage?

• Increased blue = ideal for veg (4000K white light spectrum)
• Increased red = ideal for flower (3000K or 3500K white light spectrum)
• Does the fixture offer spectrum tuning between the growth and flower stage? While not entirely necessary, this can help save energy while delivering an ideal spectrum during veg and flower.

Light Intensity

The more light your LED actually gives off, the bigger your yields (for the most part). So, the best LED grow lights need to be incredibly powerful.

What is the PPF of the fixture? Is this a sufficient amount of light considering the wattage draw and efficacy?

~1700–2400 umol/s per 5’x5’+ area

~1300–1700 umol/s per 4’x4’ to 5’x5’ area

~600–1300 umol/s per 3’x3’ to 4’x4’ area

~300–600 umol/s per 2’x2’ to 3’x3’ area

Is there a PAR map available of the fixture? Are the PPFD readings sufficient for your stage of growing? How uniform are the readings across the footprint (spotlight vs even footprint)?

• Can you calculate the average PPFD using the PAR chart? Average PPFD = Sum of PPFD readings/number of PPFD readings.
• Is the average PPFD sufficient for your plant’s stages of growth? Veg: 300–600 umol/m2/s, Flower: 600–1000 umol/m2/s or more.

Efficiency

In general, LED grow lights are very efficient. But, the best LED grow lights will maximize your efficiency. Most importantly, they operate at a high level, produce higher power, and maintain a low cost to run.

How many watts does the fixture draw from the wall? To determine this, view the fixture specifications. Be aware that the number in the title or name of the light likely doesn’t represent actual wattage. It may be a model number, total LED wattage, or an HPS wattage equivalent.

Consider about 35 watts per square foot of growing space for planning purposes. 30 watts to 44 watts is a common range. More efficient fixtures may use fewer watts per square foot. Higher intensities per square foot are possible with more efficient fixtures and a higher overall wattage draw. Wattage does not equate to light output so do not use the wattage draw to determine how ‘powerful’ a fixture might be.

What is the receptacle voltage for your light? Most home circuits in the USA are 120V. Some growers use 240V. Commercial growers typically use 240V or higher. Many other areas in the world (inc. Europe, UK, AU) use 240V. Ensure the light you select is rated for your voltage application. Most LED grow lights have a flexible driver rated from 110V-277V.

PAR Efficacy

What is the efficacy of the fixture in umol/j? This is the amount of light the fixture exudes per watt. If it is not reported, you can estimate using this equation: PPF/wattage draw. Does efficacy matter to you? If so, look for fixtures above ~2.4 umol/j (Fixtures are up to 2.8 to 2.9 umol/J in 2020). If not, at least know how much light (PPF or average PPFD) you are getting for the wattage being drawn from the wall by the fixture. Less expensive, budget lights, are typically very inefficient since they use inferior parts. Knowing the cost per photon ($/PPF) can help you decide which is the best light for your budget. Everyone wants the most light for their dollar, but it is not always attainable.

Quality Components

Given the cost of LED grow lights, they need to be seen as an investment. Obviously, your investment needs to last you a long time for it to show a return.

Therefore, the best LED grow lights are reliable and durable, standing the test of time.

All of the lights we will be listing are from the most reputable brands and include some sort of warranty. This will give you peace of mind when you purchase, knowing you are protected.

What brand of diodes does the fixture use? Higher quality diodes last longer and are more efficient (more light/watt). CREE, Samsung, Osram, Lumiled, and Bridgelux are brands that commonly used high-quality chips. Epistar and Epiled are mid to low-quality chips, in comparison.

What brand of driver or drivers power the LEDs? Mean Well and Inventronics make high-quality drivers but there are other good ones too. Low-quality drivers in most budget lights fail quickly.

Safety and Reliability

Do you require any particular certifications or markings (UL/ETL/CSA/CE, etc)? Most home growers do not need to consider these special certifications. However, commercial growers in the USA must use lights that are UL listed or ETL certified if they are to be in compliance with their state’s electrical regulations. If you are in the European Union or Canada, you might require a fixture with a CE mark and a CSA mark, respectively.

How long is the warranty? LED grow light warranties can range from 1 year to a ‘lifetime’. Most companies offer a 3-year warranty. however, 5-year warranties are also very common. Fixtures with longer warranties are generally more expensive. Know the manufacturer’s warranty policy beforehand in case something happens to your fixture.

Final thoughts

Grow lights containing mercury should be professionally discarded in a way that requires extraordinary consideration following a few years because of the shorter time span of usability. LED grow lights can keep going quite a while and after that be discarded after very nearly ten years of utilization without worrying about hurting the earth simultaneously.

The last thing that emerges about LED grow lights is the way that they don’t need to be supplanted all the time. Numerous grow lights that individuals utilize are supplanted inside a short measure of time since they destroy decently fast.

In correlation, the majority of the best commercial led grow lights can keep going for more than 50,000 hours, which means they should be supplanted following 7–8 years at the most punctual.

The cost can dismiss a few people from utilizing them, yet once the length of their life is considered it is anything but difficult to perceive how much cash can really be spared after some time.